Compression Style PCD Router Bits

ONE, TWO & THREE FLUTE PCD BITS

Our single and 2 flute PCD bits are all designed for nesting cuts with a short upshear. Upper Cutting edges shear downward toward the bottom of the material. The bottom edge shears upward to guarantee and crisp, clean edge on the bottom surface.

These bits are a disposable design, but can usually be sharpened one time before discarding. PCD Diamond tools perform best when used on homogeneous material. They tend to wear faster when used for multiple material types.

The segmented PCD style is the most common design, and the teeth overlap each other so prevent any lines from becoming visible on the finished edge. However, spindle runout, old collets and often static nuts can affect the tool performance detrimentally, so the best way to insure maximum tool life and best finish is to pair a PCD tool with an HSK heat shrink tool holder.

Our 3-flute PCD Bit is engineered for high-speed nesting operations cutting MDF, particleboard, syntactic materials, cement fiber board, phenolics, fire-rated MDF and many other highly abrasive composite materials. The 3-flute PCD Bit features a PCD plunge point (1 and 2 flute bits have carbide plunge points), and can be sharpened numerous times depending on wear patterns when the tool is dull.

Standard sizes / styles available from stock are shown below, but cannot be purchased on line. It’s important to verify the application details and make the correct tool for its purpose is selected.