All Machines

The NT N6230 is quite possibly the best valued moulder available. The 6″ x 9″ capacity moulder with a standard 6 head configuration provides limitl...

The NT N2230 is a specially designed 6″ x 9″ moulder. This 2 spindle machine is configured with a single top and bottom horizontal spindle. The eli...

The NT A4230-H is a 4 head high speed moulder. The single head per side configuration can be equipped with hydro locking helical heads and high HP ...

NT-A4230-H320 MOULDER 4 HEAD The NT A4230-H is a 4 head 320fpm high speed moulder. The single head per side configuration can be equipped with head...

NT-N4230 MOULDER 4 HEAD The NT N4230 is our standard 4 head N series machine. The 6″ x 9″ capacity moulder with a standard 4 head configuration pro...

The NT N6230 is quite possibly the best valued moulder available. The 6″ x 9″ capacity moulder with a standard 6 head configuration provides limitl...

The NT S4230-1 is a compact heavy duty 4 head moulder with large moulder capacity and a digitally positioned outside spindle for fast width changes...

The NT-DMS14-AS is our double miter saw designed for aluminum. The (2) 14″ blades cycle are individually powered and cycle together for smooth cutt...

The NT-PN14 is a double blade saw designed to cut an adjustable 90 degree notch. The (2) 5HP 14″ blades power through up to 8″ of material with ove...

The Northtech NT HWG50-HD is a horizontal wood grinder with a tilted infeed. There is a hard polymer friction resistant slide with over 4″x25″openi...

VOLTAGE, FREQUENCY: 230/460 Volt 60 Hz PHASE: 3 Phase AMP REQUIREMENT: .1 Amps FEED SYSTEM: 53-1/2'' Air Cylinder DRIVE SYSTEM: PLC FEED SPEED RANG...

The NT-J20 Jointer has a 20″ working width, 10HP and over 100″ infeed and outfeed table for a smooth and flat surface making them ideal for gluing ...

The NT-J12 Jointer has a 12″ working width and long infeed and outfeed table for a smooth and flat surface making them ideal for gluing surface pre...

The NT-J16 Jointer has a 16″ working width, 10HP and over 88″ of infeed and outfeed table for a smooth and flat surface making them ideal for gluin...

The NT-1696 Jointer has a 16″ working width and 8ft table for a smooth and flat surface making them ideal for gluing surface prep. Cast iron bases ...

The NT-1284 Jointer has a 12″ working width and 7ft table for a smooth and flat surface making them ideal for gluing surface prep. Cast iron bases ...

MACHINE HP: 5 HP VOLTAGE, FREQUENCY: 230/460 Volt 60HZ PHASE: 3 Phase AMP REQUIREMENT: 7/14 Amps CONFIGURATION: Drill / Notch 1ST STATION: Jacobs C...

Northtech Round Slot Mortisers use an oscillating round cutter to cut an adjustable length slot with rounded ends. The NT-RSM120 is designed with (...

The NT MRS340 Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Sometimes referred to ...

MAIN MOTOR HP: 50 HP VOLTAGE, FREQUENCY: 230/460 Volt 60 PHASE: 3 Phase AMP REQUIREMENT: 140/70 Amps FEED HP: (3) .75 HP Motors FEED SYSTEM: Top/Bo...

MAIN MOTOR HP: 60 HP VOLTAGE, FREQUENCY: 230/460 Volt 60 PHASE: 3 Phase AMP REQUIREMENT: 100/50 Amps FEED HP: 5 HP FEED SYSTEM: (6) Top (2) Bottom ...

The NT MRS350 Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Sometimes referred to ...

The NT MRS300 Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Sometimes referred to ...

The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as g...